SHOP

Huber SilOil M40.165/220.10, Heat transfer fluid -40 to 220 °C

Huber SilOil M40.165/220.10, Heat transfer fluid -40 to 220 °C

Huber SilOil M40.165/220.10, Heat transfer fluid -40 to 220 °C

SilOil M40.165/220.10 is a low-viscosity silicone fluid which, as a result of its special property profile, is particularly suitable for use as a cold and heat transfer medium in cryostats, thermostats and heat transfer installations.

SilOil M40.165/220.10 can be used in the range from -40 °C to 165 °C and to 220 °C in externally sealed systems (Unistats).

It should be borne in mind that, at high temperatures, SilOil M40.165/220.10 can be chemically altered by oxidising media, such as air, or substances with a catalytic effect, such as acids, lyes and various metal compounds. An increase in viscosity, and possibly even gelling of the fluid owing to crosslinking reactions, must be expected in the presence of oxidising agents, while contact with products having a catalytic effect usually induces a process of depolymerisation, resulting in a drop in viscosity.

Advantages:

• Virtually insolubile in water
• Non-corrosive
• Low setting points and vapour pressures
• High flash points
• Low toxicity
• No coking tendency under thermal stress
• High thermal stability
• Resistance to ageing
• Chlorine free

Safety Data Sheet

Heat transfer fluid M20.195/235.20Working temperature °C-40 to165/220open/closed systems:-40°C – 165°CUnistats (only closed):-40°C – 220°CMaterial:silicon oilViscosity at 25°C:10 mm²/sColourcolourless, clearMaterial incompatibilitySilicone rubber